Skip to content

Nanoproducers (generating unit below 0.8 kW)

A small electricity generating unit with a capacity of up to 0.79 kW allows you to generate part of the electricity you need on site, e.g. for charging a mobile phone, powering a computer, or watching TV. If you wish to connect your generating unit to the grid (i.e. to your household power system, which in turn is connected to the power grid), you first need to register the use of the unit with us.

Example: You are able to generate a total of up to 0.79 kW. You can use part of the generated amount for your own consumption, e.g. for watching TV (0.12 kW), while the rest (0.67 kW), if you wish, you can supply to the grid.

Total capacity of the nanoproduction units can be up to 0.79 kW

The capacity of a nanoproduction unit or units can be up to 0,79 kW at one connection point (incl. in one apartment building). If you wish to connect production equipment, including nanoproduction units with a sum of capacities of 0.8 kW or more to your connection point, an connection application of an micro-producer or an electricity producer must be submitted in order to use more production capacity.

Terms of service for nanoproduction

Register the unit

Registration of the unit is necessary for a secure connection to the network as well as for the network operator to have knowledge of the production equipment used in the network and to be able to correctly measure the quantities produced.

Submit an application

The application can be easily and conveniently submitted in self-service

  1. 1

    Submit an application

    To submit your application, go to the page for network agreements, select from the list the point of consumption where you want to register your nanoproduction unit.

  2. 2

    Device registration

    Fill in the required fields in the network contract window that opens.

  3. 3

    Network agreement amendment and use of the device

    We will review your application. If applicable, we will send you the network agreement with amended data and a confirmation that your unit is registered and ready for use.

Good to know!

If there is a multi-phase connection at the point of consumption, when connecting a nanoproduction unit, make sure that it is used in the same phase as the consumption. If the nanoproduction unit is connected to a phase where there is no consumption, then the amount of electricity consumed from the network will not be reduced and the produced electricity will be supplied to the network.